SALE
Frigidaire 5304505192 Washer Water Inlet Valve for Washing M…

Frigidaire 5304505192 Washer Water Inlet Valve for Washing M…

Original price was: $101.64.Current price is: $96.76.

Extra Features
  • Premium Quality
  • Secure Payments
  • Satisfaction Guarantee
  • Worldwide Shipping
  • Money Back Guarantee


Price: $101.64 - $96.76
(as of Nov 18, 2025 01:08:08 UTC – Details)

Frigidaire 5304505192 Washer Water Inlet Valve: A Crucial Component for Your Washing Machine

The Frigidaire 5304505192 Washer Water Inlet Valve is a vital part of your washing machine, responsible for controlling the flow of water into the machine. This valve is designed to work seamlessly with your Frigidaire washing machine, ensuring that it receives the right amount of water for each wash cycle. In this article, we will delve into the details of this valve, its importance, and what you need to know if you’re considering replacing it.

What is the Frigidaire 5304505192 Washer Water Inlet Valve?

The Frigidaire 5304505192 Washer Water Inlet Valve is a replacement part designed for specific Frigidaire washing machine models. It is responsible for regulating the water supply to the washing machine, ensuring that the right amount of water is used for each cycle. The valve is typically located at the back of the washing machine and is connected to the water supply hoses.

Importance of the Water Inlet Valve

The water inlet valve is a critical component of your washing machine. It plays a crucial role in ensuring that your machine receives the right amount of water for each cycle. If the valve is faulty or clogged, it can lead to a range of problems, including:

  • Low water pressure
  • Inadequate water supply
  • Poor washing performance
  • Increased energy consumption

A faulty water inlet valve can also lead to more severe problems, such as water damage or flooding, if left unchecked.

Symptoms of a Faulty Water Inlet Valve

If you’re experiencing any of the following issues with your washing machine, it may be a sign of a faulty water inlet valve:

  • Water not filling the machine properly
  • Water leaking from the valve or hoses
  • Poor washing performance
  • Increased noise during the wash cycle
  • Error codes indicating a water supply issue

Replacement and Installation

If you’ve determined that your Frigidaire 5304505192 Washer Water Inlet Valve is faulty, replacing it is a relatively straightforward process. You can purchase a replacement valve from a authorized Frigidaire dealer or online retailer. Before attempting to replace the valve, make sure to:

  • Turn off the water supply to the washing machine
  • Unplug the machine from the power outlet
  • Follow the manufacturer’s instructions for replacement

It’s recommended to consult a professional if you’re not comfortable with DIY repairs or if you’re unsure about the replacement process.

Conclusion

The Frigidaire 5304505192 Washer Water Inlet Valve is a vital component of your washing machine, responsible for controlling the flow of water into the machine. If you’re experiencing issues with your washing machine’s water supply, it’s essential to inspect the valve and replace it if necessary. By understanding the importance of this valve and taking prompt action to replace it, you can ensure your washing machine continues to perform optimally and efficiently.

Customers say

Customers find the washer water inlet valve works well and is easy to replace and install. The leakage aspect receives mixed feedback – while some report it’s leak-free, others mention it started leaking.

11 reviews for Frigidaire 5304505192 Washer Water Inlet Valve for Washing M…

  1. Amazon Customer –

    Excellent replacement part.
    Exact part needed, easily installed and works as intended. Worth every dollar.

  2. Bill L –

    Works great!
    Works perfectly. Installed four months ago and have not had a single problem since. Exactly as described.

  3. S. Rees –

    Resolved our leak
    There are a lot of similar parts, but I matched the image against the leaking valve on our machine. Our machine was leaking all over the floor and through into the basement. We could hear a slight hissing of the water leaking listening at the washer when it was off. Popped off the cover and it was coming out from where the inlet valve connects to the machine (as best I could tell!).Replacement was pretty straightforward – took maybe 1/2 hr (a little hard to reach the screws and not lose them into the machine). Leak fixed!

  4. Pam D. –

    Perfect replacement part
    Our Electrolux front loader quit flushing the softener compartment, so no dispensing of softener. I replaced it with this in about 20 minutes. Works perfect now.

  5. LJA –

    Is this used!!?
    Finally made it home from the holidays and this is how the item came in. Is this how they come or is this used?

  6. Patrick –

    Fit Perfectly – No more leaks
    Easy to install with YouTube!

  7. Kindle Customer –

    leaked
    Installed the valve to fix the softener not working. Fixed the softener problem but the valve leaked and flooded the washer pedestal ruining the items ln lt. Had to replace the valve again

  8. Michael Kasales –

    Worked like it should !!!
    I saved 30 dollars buying on Amazon but it really is a manufacturer defect in the way that it failed. It developed a crack in the plastic housing, which has nothing to do with a failure of switches. Just the housing developed a crack and it started to leak.

  9. lablover4 –

    Worked as a perfect replacement part for a front load Electrolux washing machine..

  10. Amazon Customer –

    Our washer sprung a leak, and I discovered that this part had cracked. I ordered and installed a replacement, and everything works as expected! Perfect transaction—thank you!

  11. D. Webster –

    The valve assembly is a perfect fit made by the original manufacturer and was quite easy to install, however… !This assembly “plugs” into a manifold and is sealed via three special rubber washers placed onto the male ends of the connection. No replacement washers were provided with valve assembly. These used washer could be old and/or damaged while replacing and could be the cause of original leak or the source of a new leak. Also, the original three mounting screws were corroded, I’m guessing, due to leak. Three new SS screws should also be provided with valve assembly. A final hint, prior to re-inserting new valve assembly into manifold, lubricate the rubber seals with some silicon lubricant to protect rubber seals and improve seal. Cheers

Add a review

Your email address will not be published. Required fields are marked *

Related products